Product name:Network soft seal gate valve
Product model:CFZ45X-10/16
Product features
This product adopts permanent magnetic materials, the appearance of novel, simple operation, using special handwheel switch valve, and the hand-wheel valve idling. The product has no lock hole, anti-clogging, durable, not easy to be damaged, the anti-theft effect is excellent, dedicated to switch the valve handwheel. Installed in the water pipeline, heating pipe or other conduit can effectively avoid the stealing phenomenon, very easy to manage.
Technical parameters
Model | CFZ45X-10 | CFZ45X-16 |
Nominal pressure | 1.0MPa (10kgf/cm2) | 1.6MPa (16kgf/cm2) |
Nominal diameter | 40 - 400mm | 40 - 400mm |
Seal test pressure | 1.1MPa (11kgf/cm2) | 1.76MPa (17.6kgf/cm2) |
Strength test pressure | 1.5MPa (15kgf/cm2) | 2.4MPa (24kgf/cm2) |
Applicable temperature | ≤ 120 ℃ | ≤ 120 ℃ |
Applicable medium | Water, plumbing, oil and other non corrosive fluid | Water, plumbing, oil and other non corrosive fluid |
Drive mode | Manual | Manual |
Can also be based on customer requirements, provide specific technical parameters of the product |
Scope of application
Can be used in urban water supply and drainage, Water Management District, district heating management, landscaping, oil and other industries.
Valve sheet of material
Valve body | Grey cast iron, ductile cast iron |
Gate | Grey cast iron, ductile cast iron, NBR, EPDM, HTV |
Valve cover | Grey cast iron, ductile cast iron |
Theft proof cap | Stainless steel |
Valve stem | Stainless steel |
Sealing sleeve | Brass |
Valve stem nut | Brass |
Sealing ring | NBR, HTV |
Manufacturing specification
Valve structure length consistent with GB/T 12221-1989 short series; valve connecting flange size DN40 ~ 500mm drill press GB/T 17241.6-1998 standards, DN40 ~ 200mm outer diameter of the flange made according to standard PN10/16, DN250 ~ 500mm outer diameter of the flange is in line with the PN16 standard; pressure test in accordance with GB/T 13927-1992 requirements.
Data sheet(unit: mm)
Nominal diameter (DN) | Structure length | H | Bolt | |
10Kg | 16Kg | Reference weight kg |
Bolt hole center circle diameter D | Bolt hole diameter | Number | Thread specification | Bolt hole center circle diameter D | Bolt hole diameter | Number | Thread specification |
40 | 165 | 170 | 110 | 19 | 4 | M16 | 110 | 19 | 4 | M16 | 7 |
50 | 178 | 185 | 125 | 19 | 4 | M16 | 125 | 19 | 4 | M16 | 9 |
65 | 190 | 205 | 145 | 19 | 4 | M16 | 145 | 19 | 4 | M16 | 12 |
80 | 203 | 310 | 160 | 19 | 8 | M16 | 160 | 19 | 8 | M16 | 20 |
100 | 229 | 340 | 180 | 19 | 8 | M16 | 180 | 19 | 8 | M16 | 27 |
150 | 267 | 430 | 240 | 23 | 8 | M20 | 240 | 23 | 8 | M20 | 50 |
200 | 292 | 520 | 295 | 23 | 8 | M20 | 295 | 23 | 12 | M20 | 80 |
250 | 330 | 545 | 350 | 23 | 12 | M20 | 355 | 28 | 12 | M24 | 120 |
300 | 356 | 660 | 400 | 23 | 12 | M20 | 410 | 28 | 12 | M24 | 160 |
400 | 406 | 915 | 515 | 28 | 16 | M24 | 525 | 31 | 16 | M27 | 280 |
500 | 457 | 1110 | 620 | 28 | 20 | M24 | 650 | 34 | 20 | M30 | 450 |