Product name:Direct buried type soft sealing gate valve(buried type soft sealing gate valve)
Product model:MZ45X-10/16
Product features
The company produces maintenance-freeDirect buried type soft sealing gate valveIs the Ministry of construction, "construction" eleven five "technical bulletin" the only product promotion application project.
The product can be in the construction of the valve directly buried underground, do not work well, reducing the surface excavation area, save a space position, keeping the pavement in appearance, reduce the difficulty of construction, reduce the project cost, and according to the valve buried depth and the distance between the ground to make any adjustment.Because of the product exposed on the pavement of valve box is very small, so it is suitable for indoor installation underground, can maintain indoor environmental aesthetics.
The product design life of 30 years, long-term use does not leak, maintenance-free advantages, but also can effectively avoid others arbitrarily switch valve and manhole cover and manhole covers theft because of loss of wounding phenomenon.
Technical parameters
Model | MZ45X-10 | MZ45X-16 |
Nominal pressure | 1.0MPa (10kgf/cm2) | 1.6MPa (16kgf/cm2) |
Nominal diameter | 40 - 500mm | 40 - 500mm |
Well tube length | 0.3 - 2m | 0.3 - 2m |
Well tube telescopic adjustment | 0.2 - 1m | 0.2 - 1m |
Seal test pressure | 1.1MPa (11kgf/cm2) | 1.76MPa (17.6kgf/cm2) |
Strength test pressure | 1.5MPa (15kgf/cm2) | 2.4MPa (24kgf/cm2) |
Applicable temperature | ≤ 120 ℃ | ≤ 120 ℃ |
Applicable medium | Water, oil and other non corrosive fluid | Water, oil and other non corrosive fluid |
Drive mode | Manual, electric | Manual, electric |
Can also be based on customer requirements, provide specific technical parameters of the product |
Scope of application
Can be used in urban water supply and drainage, water supply and drainage area, district heating, landscaping, petroleum, railways, power plants, environmental protection and other industries.
Valve sheet of material
Valve body | Grey cast iron, ductile cast iron |
Gate | Grey cast iron, ductile cast iron, NBR, EPDM |
Valve cover | Grey cast iron, ductile cast iron |
Valve stem, lengthened the operating rod | Stainless steel |
Sealing sleeve | Brass |
Valve stem nut | Brass |
Sealing ring | NBR |
Protection tube telescopic section | Steel tube with two layers of antiseptic treatment |
Valve box, a box cover | Grey cast iron, ductile cast iron |
Manufacturing specification
Valve connection size accords with GB17241.6-1998 standard, valves structure length consistent with short GB/T12221-1989 series standard, pressure test in accordance with GB/T13927-1992 requirements.
Installation notes(for details, please refer to the installation instructions)
Gate valve with pipe connection should be natural and smooth, avoid perpendicular to the pipe bending, the gate valve and the valve box, protective pipe section should be kept vertical installation. Should be installed to ensure the telescopic supporting tube and lengthen the operating rod and reliable connection, valve box valve box top location should be level with the ground, requirement of valve extension rod tip to the valve box top distance to 5-10 centimeter advisable.